Music, drum and guitar room acoustics protect neighbours and preserve musical quality in spaces where high-dB instruments are played, professionally or as a hobby. Drums hit 110-115 dBA, electric-guitar amps 105 dBA — multi-layer insulation and proper bass control are mandatory.
What is music room acoustics?
Music room acoustics aims to design a space where professional or amateur musicians can practise without bothering neighbours and without losing musical quality. Drums, electric guitar and percussion produce 105-115 dBA — far above what standard residential build-ups can contain.
dB by instrument
- Acoustic drum kit: 110-115 dBA
- Electric guitar amp: 100-115 dBA
- Bass guitar amp: 105-110 dBA
- Acoustic guitar: 80-90 dBA
- Saxophone / wind instruments: 100-110 dBA
- Acoustic piano: 90-100 dBA
- Digital piano (with headphones): 60-70 dBA
Build-up approach
- Floating concrete screed: critical to break drum-kick structural vibration
- Independent double-leaf wall: Rw 60+ dB target
- Vibroacoustically suspended ceiling: reduces transfer to the floor above
- Acoustic door (Rw 40+ dB)
- Bass traps: low-frequency absorbers in corners
- Broadband absorbent panels
- Diffusers (where needed): to avoid being too dry
Bass-frequency control
Bass guitar and kick drum produce high level in the 50-100 Hz range. This low frequency travels easily through structure to neighbouring flats; raising mass alone is not enough. Our standard build-up: independent double-leaf studs + 100+ mm air gap + bass traps.
Interior balance
The interior must not be too dry (RT60 < 0.3 s makes the music sound artificial) or too reverberant (RT60 > 0.8 s blurs instruments). Target: RT60 0.4-0.5 seconds.
Target performance
- Sound insulation Rw: 60-70 dB
- RT60: 0.4-0.5 seconds
- Low-frequency reduction: -25 dB (structure-borne)
- NC: 25-30
Time and cost
A professional rehearsal room takes 4-8 weeks; a hobby-level room 2-4 weeks. Investment scales with target Rw and room size.
Related
For professional music spaces see our Recording studio acoustics guide.
Features
On-site acoustic measurement and noise source analysis
Detailed engineering with professional simulation software
Certified material selection (BS476 Class 0, UNI 9175)
Meticulous installation and execution with our experienced team
Final measurement and performance warranty report
Process
Survey & Measurement
On-site survey and acoustic measurement.
Simulation & Design
Simulation with acoustic software, detailed quote.
Installation
Turnkey installation with certified materials.
Verification & Report
Final measurement, performance report, warranty.
Technical Specifications
| Application Standard | BS476 Class 0, UNI 9175 M1, Firex |
|---|---|
| Typical Noise Reduction | 25-45 dB (project-dependent) |
| Installation Time | Confirmed after survey (1-15 days) |
| Warranty | Measured result + 2-year workmanship warranty |